Orientation-dependent deformation mechanisms of bcc niobium nanoparticles

Nanoparticles usually exhibit pronounced anisotropic properties, and a close insight into the atomic-scale deformation mechanisms is of great interest. In present study, atomic simulations are conducted to analyse the compression of bcc nanoparticles, and orientation-dependent features are addressed. It is revealed that surface morphology under indenter predominantly governs the initial elastic response. The loading curve follows the flat punch contact model in [1 1 0] compression, while it obeys the Hertzian contact model in [1 1 1] and [0 0 1] compressions. In plastic deformation regime, full dislocation gliding is dominated in [1 1 0] compression, while deformation twinning is prominent in [1 1 1] compression, and these two mechanisms coexist in [0 0 1] compression. Such deformation mechanisms are distinct from those in bulk crystals under nanoindentation and nanopillars under compression, and the major differences are also illuminated. Our results provide an atomic perspective on the mechanical behaviours of bcc nanoparticles and are helpful for the design of nanoparticle-based components and systems.     

A chronological test of ocean-bottom spreading in the North Atlantic

Fission-track and K-Ar dating of basaltic glass from the Mid-Atlantic Ridge gives results which are consistent with the proposal of ocean-floor spreading. Correlation exists between the magnetic anomaly patterns over the Crest Mountains at 45°N and the age of the outcropping basalts. The observed sequences of ages progressing outward from the Median Valley 11,000, 230,000, 310,000, 750.000, 8,000,000, and 16,000,000 years constitute strong, direct support for the idea of ocean-bottom spreading.     

PbTiO3/SrTiO3(010)异质界面上的周期性失配位错及电子富集

It is important to determine the effects of misfit dislocations and other defects on the domain structure, ferroelectricity, conductivity, and other physical properties of ferroelectric thin films to understand their ferroelectric and piezoelectric behaviors. Much attention has been given to ferroelectric PbTiO₃/SrTiO₃ or PbZr_0.2Ti_0.8O₃/SrTiO₃ heterointerfaces, at which improper ferroelectricity, a spin-polarized two-dimensional electron gas, and other physical phenomena have been found. However, those heterointerfaces were all (001) planes, and there has been no experimental studies on the growth of (010) PbTiO₃/SrTiO₃ heterointerface due to the 6.4% misfit between two materials. In this study, we selected an atomically flat (010) PbTiO₃/SrTiO₃ heterointerface grown using a two-step hydrothermal method as the research subject, and this is the first experimental report on that interface. Interfacial dislocations can play a significant role in causing dramatic changes in the Curie temperature and polarization distribution near the dislocation cores, especially when the size of a ferroelectric thin film is scaled down to the nanoscale. The results of previous studies on the effects of interfacial dislocations on the physical properties of ferroelectric thin films have been contradictory. Thus, this issue needs to be explored more deeply in the future. This study used aberration corrected scanning transmission electron microscopy (STEM) to study the atomic structure of a (010) PbTiO₃/SrTiO₃ heterointerface and found periodic misfit dislocations with a Burgers vector of a[001]. The extra planes at the dislocation cores could relieve the misfit strain between the two materials in the [001] direction and thus allowed the growth of such an atomically sharp heterointerface. Moreover, monochromated electron energy-loss spectroscopy with an atomic scale spatial resolution and high energy resolution was used to explore the charge distribution near the periodic misfit dislocation cores. The fine structure of the Ti L edge was quantitatively analyzed by linearly fitting the experimental spectra recorded at various locations near and at the misfit dislocation cores with the Ti³⁺ and Ti⁴⁺ reference spectra. Therefore, the accurate valence change of Ti could be determined, which corresponded to the charge distribution. The probable existence of an aggregation of electrons was found near the a[001] dislocation cores, and the density of the electrons calculated from the valence change was 0.26 electrons per unit cell. Based on an analysis of the fine structure of the oxygen K edge, it could be argued that the electrons aggregating at the dislocation cores came from the oxygen vacancies in the interior regions of the PbTiO₃. This aggregation of electrons will probably increase the electron conductivity along the dislocation line. The physics of two-dimensional charge distributions at oxide interfaces have been intensively studied, however, little attention had been given to the one-dimensional charge distribution. Therefore, the results of this study can stimulate research interest in exploring the influence of the interfacial dislocations on the physics of ferroelectric heterointerfaces.     

滚珠式基座抗震楼的模拟实验

设计了滚珠式基座抗震楼的模拟实验,通过滚珠基座内滚珠的滚动来降低地震时横波和面波所产生的破坏作用.模拟地震实验证明滚珠式基座可以减弱地震对房屋的破坏.     

单纵模671nm红光激光器

利用全波片和Nd:YVO4激光器的偏振特性构成双折射滤光片,使用I类临界相位匹配LBO作为倍频晶体,在注入泵浦功率2.7W的情况下获得149mW的671nm单纵模红光输出,光-光转换率5.6%,该结构简单、紧凑,适合用于中低功率激光器。     

基于纵向数据下连续型单参数指数族参数的经验贝叶斯检验(英文)

本文讨论了在纵向数据下,运用非参数估计方法构造了连续型单参数指数族参数的经验贝叶斯检验函数,证明了所提出的经验贝叶斯检验函数的渐近最优性,并获得了它的收敛速度.     

A hybrid legendre tau method for the solution of a class of nonlinear wave equations with nonlinear dissipative terms

This article presents a technique based on the hybrid Legendre tau‐finite difference method to solve the fourth order wave equation which arises in the elasto‐plastic‐microstructure models for longitudinal motion of an elasto‐plastic bar. Illustrative examples and numerical results obtained using new technique demonstrate that the proposed approach is efficient in treating longitudinal equation of ealsto‐plastic bar. © 2010 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 27: 1055–1071, 2011     

Exact analytical solutions for axial flow of a fractional second grade fluid between two coaxial cylinders

The velocity field and the adequate shear stress corresponding to the longitudinal flow of a fractional second grade fluid, between two infinite coaxial circular cylinders, are determined by applying the Laplace and finite Hankel transforms. Initially the fluid is at rest, and at time t = 0⁺, the inner cylinder suddenly begins to translate along the common axis with constant acceleration. The solutions that have been obtained are presented in terms of generalized G functions. Moreover, these solutions satisfy both the governing differential equations and all imposed initial and boundary conditions. The corresponding solutions for ordinary second grade and Newtonian fluids are obtained as limiting cases of the general solutions. Finally, some characteristics of the motion, as well as the influences of the material and fractional parameters on the fluid motion and a comparison between models, are underlined by graphical illustrations.     

Anti-plane elastodynamic analysis of orthotropic planes weakened by several cracks

Stress analysis is carried out in an orthotropic plane containing a Volterra-type dislocation, the distributed dislocation technique is employed to obtain integral equations for an orthotropic plane weakened by cracks under time-harmonic anti-plane traction. The integral equations are of Cauchy singular type at the location of dislocation which are solved numerically. Several examples are solved and the stress intensity factors for multiple cracks with different configuration are obtained.     

Mixed mode axisymmetric annular cracks in a finite layer: Off angle crack initiation

The solutions of axisymmetric Volterra type climb and glide edge dislocations are obtained in a layer by means of the Hankel transforms. Utilizing the same procedure, Green’s function solution is obtained for a layer under self-equilibration normal ring traction. The distributed dislocation technique is used to construct integral equations for a system of co-axial annular cracks where the layer is under axisymmetric normal loads. These equations are solved numerically to obtain dislocation density on the cracks surfaces. The results are employed to determine stress intensity factors for annular and penny-shaped cracks and the interaction between two co-axial penny-shaped cracks is studied. Moreover, the stress intensity factors of the interacting cracks are determined such that they can be further used in conjunction with strain energy density (SED) failure criterion to obtain the possible direction of crack initiation that may not be apparent under mixed mode conditions.